Creality 3D

K1

New generation 3D printer by Creality
€ 539.99  incl VAT
Dispatches same business day!
Stock - NL: 46

Product description

Check out the K1 printer from Creality 3D now.

The K1 is assembled and calibrated before shipment. Just start printing the moment your K1 arrives.

This printer is 12 times faster than a regular FDM 3D printer. A fast speed cuts printing time and raises efficiency.It uses less energy for the same output, thus more eco-friendly.

The new ceramic heater, encircling the entire hotend. It heats to 200℃ in 40s and melts the filament instantly. Dual-gear direct extruder, delivering 50N strong extrusion force.

A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too. The model hardens before any stringing and warping could happen.
It allows support-free bridges and overhangs.

  • 300x300x300mm
  • 600mm/s max speed
  • Hands-free auto leveling
  • AI camera optional

Specifications

General properties
sku C3DK1
gtin 6971636407010
Series k1
Nozzle properties
Nozzle diameter 0.4 mm
Max. hot-end temperature 300 °C
Dimensions
Height 355 mm
Width 355 mm
Depth 480 mm
3D printer properties
Buildvolume

The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.

22x22x25 cm
Max. printing speed

Maximum speed for printing moves of the machine, so while extruding filament.

600 mm/s
Max. heated bed. temp. 100 °C
Type of 3D printer FDM/FFF
Features
Display type 4.3" Color LCD
Type of control interface Touch screen
USB
Heated bed

A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.

More info

Auto Bed Leveling

The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.

WIFI

This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.

Filament sensor

Detect if you have run out of filament or that the filament is broken.

Optical
Enclosed

This machine has an enclosure to protect the print or product from outside influences.

Bed level sensor

Type of bed leveling sensor to do the bed leveling procedure.

Inductive
Electrical specifications
Input voltage 100/240 V
Max. Power rating 350 W
Extruder properties
Feed system Direct-drive
Filament diameter 1.75 mm
Extruder type

Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here

Direct-drive

SuppliesSupplies

Discover all the parts and accessories that you can use with the K1. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.

Lubrication and maintenance

Super lube ( 7 ml )
Perfect for lubrication of bearings and linear sliders
  € 7.50

home
Copyright 2009 - 2023 | ReprapWorld